【卡特彼勒12K平地机参数】

更多卡特彼勒平地机

更多热门平地机

更多卡特彼勒主营业务分

卡特彼勒12K平地机

技术参数
性能特点
结构特点
施工案例

名称	参数
前段侧板－宽度	9.5 in
前段顶板/底板－宽度	12 in
前段顶板/底板－厚度	1 in
前轮轴－每侧的总摆动	32 Degrees
前轮轴－车轮倾斜，左/右	18 Degrees
前轮轴－到中心的高度	24.2 in
牵引杆－宽度	3 in
牵引杆－高度	5 in
回转盘铲刀横梁厚度	1.2 in
回转盘直径	60.2 in
后部：松土器齿杆固定座数量	10.5 in
后部：最大松土深度	9
后部：最大裂土深度	16.2 in
后部：工作宽度	90.6 in
中部 V 型架：松土器齿杆固定座间距	4.6 in
中部 V 型架：松土器齿杆固定座数量	11
中部 V 型架：最大松土深度	11.5 in
中部 V 型架：工作宽度	46.6 in
横梁升高后机器长度增加	38.2 in
掘起力	20461.1 lb
穿透力	17740.6 lb
裂土器齿杆固定座数量	5
裂土器齿杆固定座间距	21 in
最大裂土深度	28.9 in
最大提升离地高度	73.2 in
最大开挖深度	18.9 in
伸出轮胎外侧的最大铲刀长度－右侧	5 Degrees
伸出轮胎外侧的最大铲刀长度－左侧	71.2 in
铲刀倾翻范围－向后	40 Degrees
铲刀倾翻范围－向前	90 Degrees
最大铲刀方位角	20.2 in
刮土板侧移－向左	26.1 in
刮土板侧移－向右	29.6 in
回转盘从左侧向中心移动	28.7 in
储油箱容量	14 gal
备用压力	522.1 psi
最大系统压力	3698.5 psi
泵输出	55.6 gal/min
泵类型	Variable piston
回路类型	Load Sensing, Closed Center, PPPC
后退第 6 档	22 mph
后退第 5 档	15.1 mph
后退第 4 档	8.1 mph
后退第 3 档	5.1 mph
后退第 2 档	3.5 mph
后退第 1 档	1.9 mph
前进第 8 档	27.9 mph
前进第 6 档	13.9 mph
前进第 7 档	19.2 mph
前进第 5 档	10.2 mph
前进第 4 档	6.5 mph
前进第 3 档	4.7 mph
前进第 2 档	3.2 mph
前进第 1 档	2.4 mph
左/右铰接角度	20 Degrees
转向范围－左/右	47.5 Degrees
前轮外侧的转弯半径	24.6 ft
最高后退速度	22 mph
最高前进速度	27.9 mph
停车制动器	Air actuated, multiple oil-disc
行车制动器表面区	3712 in2
行车制动器	Air actuated, multiple oil-disc
变速箱	Direct Drive, powershift
前进/后退档位	8 fwd / 6 rev
下施压力－最大车辆总重	27957 lb
下施压力－基本车辆总重	16541 lb
铲刀牵拉力－最大车辆总重	26782 lb
铲刀牵拉力－基本车辆总重	19909 lb
端刃－厚度	0.6 in
端刃 - 宽度	6 in
铲刃－厚度	0.6 in
铲刃－宽度	6 in
开口间隙	4.7 in
拱形架半径	16.3 in
刮土板－厚度	0.9 in
刮土板－高度	24 in
铲刀宽度	12 ft
最大机器总重－后轮轴	29758 lb
最大车辆总重－前轮轴	16023 lb
最大车辆总重	45781 lb
基本车辆总重－后轮轴	21148 lb
基本车辆总重－前轮轴	9064 lb
基本车辆总重－总	30212 lb
可变功率范围－净功率	145 hp
可变功率范围－净功率	108-123 kW (145-165 hp)
高环境性能	122 ° F
高温型－最高风扇转速	1450 RPM
导致功率下降的海拔高度	10000 ft
气缸数	6
额定功率时的速度	2000 RPM
冲程	5 in
缸径	4.1 in
排量	439 in3
可变功率－ 4-8 档（总功率）	178 hp
可变功率 - 第 3 档（总功率）	168 hp
可变功率－ 1-2 档（总功率）	158 hp
可变功率－ 4-8 档（净功率）	165 hp
可变功率 -第 3 档（净功率）	156 hp
可变功率－ 1-2 档（净功率）	145 hp
发动机型号	Cat® C7 ACERT™
基本功率（所有档位）（净功率）	145 hp
前段侧板－厚度	0.5 in
最小前衬板重量	112 lb/ft
最大前衬板重量	144 lb/ft
最小前架截面模数	127 in2
最大前架截面模数	291 in2
高度	19.9 in
宽度	7.9 in
侧壁厚度－内侧	0.6 in
侧壁厚度－外侧	0.7 in
驱动链节距	2 in
轮轴间距	59.9 in
串联驱动摆动－前部向上	15 Degrees
串联驱动摆动－前部向下	25 Degrees
燃油容量	80.6 gal
冷却系统	10.6 gal
发动机机油	6.6 gal
变速箱/差速器/终传动	12.4 gal
串联驱动齿轮箱（每侧）	16.9 gal
前轮轴轴承座	0.1 gal
回转盘驱动齿轮箱	1.9 gal
高度 - ROPS驾驶室	130.9 in
高度 - 非ROPS驾驶室	130.6 in
长度－双轮组轮轴之间	60 in
长度－前轮轴至刮土板	101.9 in
长度－前轮轴至双轮组中央	239.6 in
长度－前轮至机器后部	334.8 in
长度－配重到裂土器	394.2 in
变速箱离地间隙	12.1 in
高度油缸顶部	118.7 in
至排气管的高度	111.1 in
宽度－轮胎中心线	80.1 in
宽度－后轮外侧	96.6 in
宽度－前轮外侧	97.7 in
ROPS / FOPS	ISO 3471:1994/ISO 3499:1992
转向	ISO 5010:1992
制动器	ISO 3450:1996
高度－配矮型ROPS驾驶室	121.9 in
高度 - 配高型非ROPS顶篷	130.7 in
高度 ROPS顶篷	130.9 in
高度 - 配高型非ROPS半上置式驾驶室	130.7 in
离地间隙 - 前轮轴中心	23 in
噪声	ISO 6394:1998/ISO 6393:1998

12K 标配设备

ELECTRICAL

Alternator, 95 ampere, sealed

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Electrical system, 24 volt

Horn, electric

Lights, stop and tail

Motor, starting

Product Link Ready

Working lights

OPERATOR ENVIRONMENT

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

POWER TRAIN

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air to air after cooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

Fuel water separator

Muffler, under hood

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump, fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

VHP (Variable Horsepower)

OTHER STANDARD EQUIPMENT

Bumper, rear

CD ROM Parts Book

Circle drive slip clutch

Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

Doors, Engine compartment

Drawbar, 6 shoes with replaceable nylon composite wear strips

Endbits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

S·O·S ports, engine, hydraulic, transmission and cooling

Toolbox with padlock

Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

TIRES, RIMS, AND WHEELS

A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

ANTIFREEZE

Extended Life Coolant to –35° C (–30° F)

12K 选配设备

GUARDS

Guard, transmission

OPERATOR ENVIRONMENT

Air conditioner with heater

Heater, cab

CAB/CANOPY

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirrors, outside mounted

Power port, 12V accessory

Radio ready entertainment

Tachometer/Speedometer

* Cab weights represent changes to Typically Equipped machine weights.

RIPPER/SCARIFIER

Ripper/Scarifier, rear mounted

Scarifier, mid mounted, V-type

LIGHTS

Bar mounted, low, directional and headlights

Cab and bar mounted, high, directional, headlights and work lights

POWER TRAIN

Autoshift

OTHER ATTACHMENTS

Product Link

Snow Wing Mounting, frame-ready

AccuGrade ARO

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220V

HYDRAULICS

Pump, hydraulic, high capacity

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

BLADES, MOLDBOARDS

Blade, 4267 mm × 610 mm × 22 mm (14' × 24" × 7/8")

Blade, front

Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 4267 mm (14 ft) blade

Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges